Approvals

Some approval documents are available to view by clicking the icons below.

Warning: Cancer and Reproduction Harm California Proposition 65
  • Crane unit with five-digit, 1.5 in (38 cm) LED display
  • Top lifting eye and bottom swivel hook
  • Lb/kg switch selectable
  • Six volt rechargeable battery and universal 115/230 VAC, 50/60 Hz battery charger (NA plug standard)
  • Meets or exceeds OSHA, ANSI, ASME and other safety design standards (5:1 Ultimate Safety Factor)

Options:

  • Audible alarm
  • Universal direct power supply, 85-265VAC, 47-440Hz / 130-300VDC
  • RF remote controller
  • RF remote display, handheld or desk mountable

Request a Quote

or contact us direct: 715-723-5719

Information

A Crane Scale Classic

The MSI-3460 with ScaleCore measurement module provides industry leading weighing features of previous Challenger designs plus much more. Long range viewing is enhanced with a larger 1.5 inch (38 millimeter) ultra-bright LED digital display and resolution settings of up to 10,000 divisions for precise 0.1 percent loading accuracy. Product operating time is extended to over 80 plus hours with a single six-volt rechargeable battery. The original signature Challenger packaging has been upgraded to NEMA Type 4/IP65 levels. Manufactured in the USA in strict compliance with the highest safety standards, Challenger continues to sustain minimum 200 percent safe and 500 percent ultimate load ratings.

A ScaleCore electronics retrofit kit is available for upgrading existing MSI-3260 or MSI-3360 Challengers to new generation MSI-3460.

MSI-3460 Challenger 3 Options

(Contact MSI for application consultation)

  • Rugged remote control (control for On/Off, Zero, Tare and other functions)
  • RF modem install for connectivity to MSI-8000 or MSI-8000HD RF remote display (100 ft line of sight)
  • RF scoreboard
  • NTEP Certified (250 lb-10,000 lb capacities)
  • Universal direct power supply (115/230 VAC)
  • Audible alarm
  • Wi-Fi or Bluetooth® communications
  • Potential receivers: MSI-8000, MSI-8000HD, 7000/1

MSI-3460 Challenger 3 Specifications

Accuracy: ± (0.1% +1 d) of applied load

Resolution: 2000 to 3750 d standard (Up to 10,000 d available)

Enclosure: NEMA Type 4, IP65, powder coated cast aluminum

Lifting Eye & Hook: Crosby® or equivalent with 360° non-bearing swivel hook

Design Overload: 200% Safe / 500% Ultimate

Functions: Power:  Turns unit ON or OFF Zero:  Zeros applied load up to 100% of capacity (limited range in NTEP/OIML configurations) Tare:  Tares applied load and displays weight in Net mode User:  Programmable as TEST, UNITS, NET/GROSS, TOTAL, PEAK HOLD & SETPOINTS

Display: 5-digit, 1.5 in (38 mm) LED with programmable brightness control

Displayable Units: Pounds or kilogram selectable

Annunciators: COZ, Net, Gross, Total, Peak, Low Battery, lb/kg, Motion, Setpoints, ACK IN, ACK OUT, RF

Power: 6 Volt rechargeable battery. 115/230 VAC battery charger is included

Operating Time: Up to 80 hours between charging with typical use. Less with optional RF Model

Operating Temperature: -40° to 104°F (-40° to 40°C)

Auto-Off Mode: Select for 15, 30, 45, 60 minutes or Off

Auto Sleep Mode: Power down during non-use and power up with weight change or any key press

Service Counters: Counts number of lifts over percentage of capacity and lifts over capacity

Calibration: Digital

Filtering: OFF, LO, HI-1, HI-2 selectable

Warranty: One-year limited

Approvals: NTEP CC 86-021